-
Amana Tool 55390 Carbide Tipped Lock Miter 45 Deg x 2-11/16 Dia x 1-3/16 x 1/2 Inch Shank for 1/2 - 1 Inch Material
The lock miter is an interlocking edge-to-edge joint, typically used at the corners of casework. Used in a table-mounted router, run at reduced speed, this bit cuts both halves of the joint. The same setup of bit and fence cuts both parts. One part...- $109.99
- $109.99
- Unit price
- per
-
Amana Tool 55392 Carbide Tipped Finger Joint Assembly 1-9/16 Dia x 1-3/8 x 1/2 Inch Shank with Upper BB
Ideal for joining wood end-to-end as well as edge-to-edge, the finger joint can be routed quickly and accurately with this tool. Rout one workpiece face up, the other face down. When the bit height is correct, the two pieces should slide together with their...- $129.99
- $129.99
- Unit price
- per
-
Amana Tool 55393 Carbide Tipped Lock Miter 45 Deg x 1-1/2 Dia x 1/2 x 1/4 Inch Shank for 5/16 - 7/16 Material
The lock miter is an interlocking edge-to-edge joint, typically used at the corners of casework. Used in a table-mounted router, run at reduced speed, this bit cuts both halves of the joint. The same setup of bit and fence cuts both parts. One part...- $79.99
- $79.99
- Unit price
- per
-
Amana Tool 55400 Carbide Tipped Tongue & Groove 3/8 Kerf x 1-5/8 Dia x 3/4 x 1/2 Inch Shank Assembly for 1/2 to 3/4 Material
Cut perfectly fitted tongue-and-groove joints on stock between 1/2" and 3/4" thick with a table-mounted router and this assembly. The tool consists of an arbor with an integral shank, two identical, removable slotting cutters, and a pair of bearings. To cut tongues, sandwich one...- $69.99
- $69.99
- Unit price
- per
-
Amana Tool 55420 Carbide Tipped 2-Piece Concave Stile and Rail 1-5/8 Dia x 1-1/16 x 1/4 Radius x 1/2 Inch Shank Set
These sets include two trim cutters for stock 7/8" through 1" in thickness. (These trim cutters can be removed for making bearing-guided cuts on stock under 7/8" thick.) Use in a table-mounted router. Guide straight cuts with the fence, setting it tangent to the...- $149.99
- $149.99
- Unit price
- per
-
Amana Tool 55430 Carbide Tipped 2-Piece Ogee Stile and Rail 1-5/8 Dia x 1-1/16 x 1/4 Radius x 1/2 Inch Shank Set
These sets include two trim cutters for stock 7/8" through 1" in thickness. (These trim cutters can be removed for making bearing-guided cuts on stock under 7/8" thick.) Use in a table-mounted router. Guide straight cuts with the fence, setting it tangent to the...- $149.99
- $149.99
- Unit price
- per
-
Amana Tool 55440 Carbide Tipped 2-Piece Stile and Rail 1-5/8 Dia x 1-1/16 x 3/16 Radius x 1/2 Inch Shank Set
These sets include two trim cutters for stock 7/8" through 1" in thickness. (These trim cutters can be removed for making bearing-guided cuts on stock under 7/8" thick.) Use in a table-mounted router. Guide straight cuts with the fence, setting it tangent to the...- $154.99
- $154.99
- Unit price
- per
-
Amana Tool 55500 E-Z Dial Slot Cutter 4 Wing x 2-1/8 Dia x 1/8-1/4 x 1/2 Inch Shank
Finally, a slot cutter without shims, spacers and the need to disassemble the bit. Just turn the dial and lock the setting, it's that easy. The E-Z Dial™ adjusts in just seconds and is accurate to .004." Cutting precise grooves in today's undersized plywood...- $129.99
- $129.99
- Unit price
- per
-
Amana Tool 56114 Carbide Tipped Plunging Classical 13/64 Radius x 1 Inch Dia x 11/16 x 1/2 Shank
Use this bit to form a bead-sided groove with a rounded bottom to embellish solid wood surfaces. It can be used in handheld, table-mounted and CNC routers, guided with an edge guide, fence, or in conjunction with a template guide bushing.- $54.99
- $54.99
- Unit price
- per
-
Amana Tool 56140 Carbide Tipped Classical Plunge with Upper BB 5/32 Radius x 1-3/8 Dia x 9/16 x 1/2 Inch Shank
Rout decorative grooves on solid wood or MDF panels and surfaces with a handheld router. Form edges with a hand router equipped with an edge guide or on a router table. Shank-mounted bearing allows cuts to be guided by a template mounted atop the...- $79.99
- $79.99
- Unit price
- per
-
Amana Tool 57184 Carbide Tipped Super Flush Trim 3/4 Dia x 1 Inch x 1/2 Shank x 4-Flute
For a super-smooth cut finish, use a four-flute bit. Feed rate is reduced, and chipping is virtually eliminated. AMAX Extended Life Features: 200% longer life time even when working with abrasive materials Superior geometric design Advanced grinding technology that improves the carbides' resistance to...- $49.99
- $49.99
- Unit price
- per
-
Amana Tool MA10024 Carbide Tipped Thin Kerf Ripping Mamba Contractor Series 10 Inch Dia x 24T, ATB+F, 20 Deg, 5/8 Bore Circular Saw Blade
• Laser cut plate, bore, expansion slots and stabilizer vents• Thin kerf blades• Electrostatic Non-Stick Coating- $36.99
- $36.99
- Unit price
- per
-
Amana Tool MA10042 Carbide Tipped Thin Kerf General Purpose Mamba Contractor Series 10 Inch Dia x 42T, ATB+F, 15 Deg, 5/8 Bore Circular Saw Blade
• Laser cut plate, bore, expansion slots and stabilizer vents• Thin kerf blades• Electrostatic Non-Stick Coating- $49.99
- $49.99
- Unit price
- per
-
Amana Tool MA10060 Carbide Tipped Thin Kerf Finishing Compound Miter Mamba Contractor Series 10 Inch Dia x 60T, ATB+F, 8 Deg, 5/8 Bore Circular Saw Blade
• Laser cut plate, bore, expansion slots and stabilizer vents• Thin kerf blades• Electrostatic Non-Stick Coating- $45.99
- $45.99
- Unit price
- per
-
Amana Tool MA8560 Carbide Tipped Thin Kerf Fine Cut Mamba Contractor Series 8-1/2 Inch Dia x 60T, ATB+F, 8 Deg, 5/8 Bore Circular Saw Blade
• Laser cut plate, bore, expansion slots and stabilizer vents• Thin kerf blades• Electrostatic Non-Stick Coating- $49.99
- $49.99
- Unit price
- per
-
Amana Tool MD10-500R Carbide Tipped Combination ArmorMax® Coated 10 Inch Dia x 50T, 4+1, 15 Deg, 5/8 Bore Circular Saw Blade
In many custom woodworking shops, one blade must cut a wide variety of materials. These blades will effectively rip or crosscut hardwoods, softwoods, as well as sheet goods such as plywood and particleboard. It features the time-tested combination blade design – four alternate top...- $59.99
- $59.99
- Unit price
- per
-
Amana Tool MD10-600R Carbide Tipped Cut-Off & Crosscut ArmorMax® Coated 10 Inch Dia x 50T, ATB, 12 Deg, 5/8 Bore Circular Saw Blade
These blades are designed for smooth crosscuts in a variety of materials from hardwoods, softwoods and sheet goods including chipboard. The alternate top bevel and 12º hook angle provides a smooth surface and a long cutting life.- $59.99
- $59.99
- Unit price
- per
-
Amana Tool MD10-601R Carbide Tipped Plywood & Laminate ArmorMax® Coated 10 Inch Dia x 60T, TCG, 12 Deg, 5/8 Bore Circular Saw Blade
These blades are specifically designed for clean cuts in plywood and single-sided laminates. The greater number of teeth, triple-chip grind and 12º hook angle provide an excellent balance between feed resistance and finish. To get a chip-free edge on both top and bottom sides...- $64.99
- $64.99
- Unit price
- per
-
Amana Tool MD10-606TBR Carbide Tipped Thin Kerf Sliding Compound Miter & Radial Arm ArmorMax® Coated 10 Inch Dia x 60T, 4 ATB + 1MFT, -5 Deg, 5/8 Bore Circular Saw Blade
These blades are specially designed for sliding compound miter saws, providing an exceptional finish. The 5º negative hook angle provides an extra margin of safety by pushing the stock downward and toward the fence. Thin kerf blades reduce waste in expensive materials and require...- $69.99
- $69.99
- Unit price
- per
-
Amana Tool MD10-800R Carbide Tipped Finito Ultimate Cut-Off & Crosscut ArmorMax® Coated 10 Inch Dia x 80T, ATB, 10 Deg, 5/8 Bore Circular Saw Blade
These blades are designed for smooth crosscuts in a variety of materials from hardwoods, softwoods and sheet goods including chipboard. The alternate top bevel and 10º hook angle provides a smooth surface and a long cutting life.- $79.99
- $79.99
- Unit price
- per
