-
Kloeckner Metals 2X10B Pipe, 2 in, 10 ft L, Threaded
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only.- $107.59
- $107.59
- Unit price
- per
-
Richmond Essential Series 6GR50SPVE2-32P Water Heater, Propane, 50 gal Tank, 32000 Btu BTU, 0.7 Energy Efficiency
Richmond Essential Water Heater, Inlet Connection Size: 1/2 in, BTU Rating: 32000 Btu, Gas Type: Propane, Tank Capacity: 50 gal, Energy Efficiency: 0.7, Recovery Rate: 32.4 gal/hr, Vent Type: Power, Vent Size: 62-1/2 in, Water Connection Location: Top, Tank Height: 51 in, Dimensions: 21-3/4...- $2,014.05
- $2,014.05
- Unit price
- per
-
Apollo 6907912CP Manifold System, 14 in OAL, 2-Inlet, 3/4 in Inlet, 12-Outlet, 1/2 in Outlet, Brass, 160 psi Pressure
Galvanized back plate for easy mounting to any structure. The cover plate is constructed of 1/4 in ABS. All manifolds are bolted to the back plate rather than screwed. Each manifold consists of two inlet ports that supply the dual chambers. 3/4 in PEX...- $237.65
- $237.65
- Unit price
- per
-
Cresline 18605 Pipe Tubing, 3/4 in, Plastic, Black, 100 ft L, 250 psi Pressure
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for...- $64.89
- $64.89
- Unit price
- per
-
Flotec FP4032 Jet Pump, 9.6/19.2 A, 115/230 V, 1 hp, 1-1/4 in Suction, 1 in Discharge Connection, 25 ft Max Head, 18 gpm
This new revision of an old-hand provides good pressure pumping from wells where the depth to water is 25 ft or less.- $579.99
- $579.99
- Unit price
- per
-
Streamline 12039 Copper Tubing, 1/4 in, 20 ft L, Short, Coil
Streamline® copper tube provides the strength, precision and cleanliness needed for the demanding conditions of HVAC and refrigeration applications. Preferred throughout the industry, our products have set the benchmark for HVACR copper tube. Streamline® Nitrogenized® ACR copper tube is pressurized with nitrogen to provide...- $37.65
- $37.65
- Unit price
- per
-
Red Lion 14942401 Well Pump, 12 A, 115 V, 0.5 hp, 1-1/4 in Connection, 231 ft Max Head, 12 gpm, Stainless Steel
4 in submersible deep well pump. Powered by a 2-wire, industry standard VMC motor. Built-in check valve prevents backflow and ensures system pressure. Built-in suction screen and 1-1/4 in NPT thermoplastic discharge head helps to prevent debris from clogging impellers and provides full flow...- $571.29
- $571.29
- Unit price
- per
-
Wayne ESP25N Battery Backup Sump Pump with Automatic Switch, 12 VDC, 1-1/2 in Outlet, 15 ft Max Lift Head, 48 gpm
Wayne Battery Backup Sump Pump with Automatic Switch, 48 gpm, Maximum Lift Head: 15 ft, Outlet Connection Size: 1-1/2 in, 12 VDC, Cord Length: 8 ft, Impeller Material: Thermoplastic, Housing Material: Steel/Cast Iron, Installation Type: Submersible, Includes: Protective Battery Case- $520.65
- $520.65
- Unit price
- per
-
Kloeckner Metals 2X10G Pipe, 2 in, 10 ft L, Threaded
Standard weight, coupled and threaded for steam and water working pressure up to 150 lb. Ordered by the length only.- $83.95
- $83.95
- Unit price
- per
-
Eco-Flo EFSA50 Sump Pump, 115 V, 1/2 hp, 1-1/2 in Outlet, 26 ft Max Lift Head, 5100 gph, Cast Iron Impeller
Eco-Flo Sump Pump, 1/2 hp, 5100 gph, Maximum Lift Head: 26 ft, Outlet Connection Size: 1-1/2 in, 115 V, Cord Length: 8 ft, Impeller Material: Cast Iron, Housing Material: Cast Iron- $175.15
- $175.15
- Unit price
- per
-
Red Lion 602137 Jet Pump with Injector, 17.6 A, 115/230 V, 0.75 hp, 1-1/4 in Suction, 1 in Discharge Connection, Iron
Ideal for use in shallow well (less than 25 ft) and deep well (25 to 90 ft) applications. For heavy-duty applications. 115/230 V heavy-duty motor with voltage selector for simple connection to existing power source. Produces up to 71 psi with automatic shut-off. Cast...- $474.65
- $474.65
- Unit price
- per
-
Superior Pump 92352 Sump Pump, 7.6 A, 120 V, 0.33 hp, 1-1/2 in Outlet, 60 gpm, Iron
Continuous duty, thermally protected split capacitor motor. Pumps will lift water up to 25 ft of vertical height. Rugged cast iron construction. Large 1-1/2 in discharge for high capacity pumping. Can be used as a utility pump by removing the float switch. 10 ft...- $260.15
- $260.15
- Unit price
- per
-
Flotec FP4012-10 Jet Pump, 9.4 A, 115/230 V, 0.5 hp, 1-1/4 in Suction, 1 in Discharge Connection, 25 ft Max Head, 8 gpm
This new revision of an old-hand provides good pressure pumping from wells where the depth to water is 25 ft or less.- $304.59
- $304.59
- Unit price
- per
-
Abbott Rubber T34 Series T34005002/RBBO Discharge Hose, 1-1/8 in ID, 50 ft L, Polyethylene, Milky White
Crushproof, suitable for marine and low-pressure discharge, abrasion- and kink-resistant, no fittings necessary.- $111.25
- $111.25
- Unit price
- per
-
Wayne SPF33 Sump Pump, 1-Phase, 9.5 A, 120 V, 0.33 hp, 1-1/2 in Outlet, 15 ft Max Head, 3750 gph, Thermoplastic
1/3 hp coated steel and reinforced thermoplastic submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction design eliminates air locks and clogging from debris in bottom of sump pit. Epoxy-coated steel motor...- $169.55
- $169.55
- Unit price
- per
-
Kloeckner Metals BLK 1 Pipe, 1 in, 21 ft L, Threaded
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use. Ordered by the length only.- $89.50
- $89.50
- Unit price
- per
-
Freeze Miser 6000-02 Outdoor Faucet Freeze Protector, 1.507 in W, Brass/Stainless Steel
Freeze Miser Outdoor Faucet Freeze Protector, Brass/Stainless Steel, 1.507 in Width, 3.53 in Height- $67.95
- $67.95
- Unit price
- per
-
Camco USA Plumber's Pack Series 07013 Water Heater Repair Kit, Includes: (2) #02342 Elements 4500 W/240 V
Contains 2 high watt density elements #02342 4500 W 240 V, 1 TOD lower thermostat #08122 and 1 TOD upper thermostat #08162.- $44.79
- $44.79
- Unit price
- per
-
NDS FWAS24 Storm Water Leaching System, 24 in Dia, Plastic, Black
NDS Flo-Well is a manufactured dry well that is an easy to install and sustainable solution for storm water runoff. Used independently or as part of a larger storm water management system, Flo-Well units collect, retain and discharge storm water on-site, offering a gravel-free...- $143.85
- $143.85
- Unit price
- per
-
Cresline 19730 Pipe Tubing, 1 in, Plastic, Blue, 100 ft L
For use with potable water. 250 psi. CTS polyethylene pipe. PE 4710 high-density, manufactured from select resins. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with compression fittings. Meets or exceeds ASTM D-2737. NSF...- $67.95
- $67.95
- Unit price
- per
CLC 21428 Nail and Tool Bag, 10-Pocket, Leather, Chestnut
CLC Nail and Tool Bag, Number of Pockets: 10, Leather, Chestnut, Strap/Belt Size: 3 in
- $149.65
- $149.65
- Unit price
- per
CLC 21962 Work Belt, 29 to 42 in Waist, Leather/Steel
CLC Work Belt, Waist Size: 29 to 42 in, Belt Type: Roller Buckle, Leather/Steel, 3 in W
- $101.89
- $101.89
- Unit price
- per
CLC Tool Works Series 179354 Carpenter's Nail/Tool Bag, 20 in W, 20-1/2 in H, 10-Pocket, Leather, White
Our premium quality, heavy-duty leather nail and tool bag with 2 main pockets, 2 additional upper pockets and 6 smaller pockets and sleeves to hold a variety of nails, fasteners and tools, includes a hammer loop and a tape measure clip.
- $61.05
- $61.05
- Unit price
- per
Malco Andy Snip MV12 Combination Snip, 12 in OAL, 3 in L Cut, Left, Right Cut, Steel Blade, Vinyl Grip Handle
Cut through heavy vinyl siding lock seams and more with ease. The MV12 aluminum handled snip is part of the legendary Andy Snip line of "lightweight snips with the strength of steel". This unique Andy™ combination snip design features a knife-like cutting edge to...
- $53.49
- $53.49
- Unit price
- per
Malco S2R Hand Seamer with Forged Jaw, 24 ga Max Sheet Thick, Forged Steel
Malco hand seamers, with forged steel jaws, are the premier choice for bending, folding, flattening and straightening sheet metal edges or safely gripping and moving sheet metal around the job site. Offset 3 in size for overhead work. The drop-forged, high-impact jaws feature depth...
- $62.65
- $62.65
- Unit price
- per
Mr. Heater MH12B Hunting Buddy Portable Heater-Camouflage
The Most Popular Portable Propane Heater in North America. This patented radiant 6000 to 12000 Btu Liquid Propane heater connects directly to one 1 lb. cylinder and is the perfect solution for heating enclosed spaces like cabins upto 300 sq-ft. A swivel regulator gives...
- $152.09
- $152.09
- Unit price
- per
Werner K12A Series K122023W Aerial Kit, Black
The Werner K122023 aerial kits include a harness and energy absorbing lanyard for use with aerial lifts. The harness and lanyard are packaged in a convenient tool bag. The URMARK logo program is available with this kit and allows personalization of the tool bag...
- $163.89
- $163.89
- Unit price
- per
- Choosing a selection results in a full page refresh.
