Senco DS230 Screwdriver Attachment, Auto-Feed, Specifications: 2 in Size, Metal, Dimensions: 10.32 in L x 2.5 in W x 5.5 in H, Suitable for: FS2200, FS2500, FS4200, FS6200, XSF03, XSF04, XSF05 Makita Screwdrivers, Includes: (2) EA0300, EA0301 Drive Bits

Senco DS230 Screwdriver Attachment, Auto-Feed, Dimensions: 10.31 in L x 2.5 in W x 5.5 in H, Suitable for: EA0314, EA0315, EA0316 Drive Bits, SG2510, SG4100 SENCO Screwdrivers, and Fasteners, Includes: EA0300 and EA0301 Drive Bit

The variable speed 2500 rpm high-Torque motor of the DS242-AC provides the power for heavy-duty applications, such as metal framing, gypsum sheathing to steel and metal decking. The adjustable depth-of-drive locks in place to ensure consistent screw placement on each drive. Senco's patented corner...

The DS530 auto-feed screwdriver attachments are ideal for those looking to extend the reach of their existing power screwdrivers. The included extension pole turns your screwdriver into a stand up tool, making it ideal for applications such as laying subfloor, underlayment, decking, cement board...

The DS530 auto-feed screwdriver attachments are ideal for those looking to extend the reach of their existing power screwdrivers. The included extension pole turns your screwdriver into a stand-up tool, making it ideal for applications such as laying sub-floor, underlayment, decking, cement board and...

The DS530 auto-feed screwdriver attachments are ideal for those looking to extend the reach of their existing power screwdrivers. The included extension pole turns your screwdriver into a stand-up tool, making it ideal for applications such as laying sub-floor, underlayment, decking, cement board and...

Senco FinishPro Brad Nailer, 1/4 in Air Inlet, Air Consumption: 2.4 scfm, Air Pressure: 70 to 120 psi, Magazine Capacity: 110, Collation Type: Straight Strip, Fastener Type: Nail, Fastener Size: 5/8 to 2-1/8 in, Triggering Mode: Selectable Actuation, Comfort-Grip Handle, Housing Material: Magnesium, Dimensions:...

The FinishPro®42XP has established itself as the marquee tool for professional finish carpenters. The FinishPro®42XP has great durability and great performance.

The Senco FinishPro® 25XP has redefined the brad nailer category! Driving both slight and medium headed 18 ga. Brads from 5/8 to 2-1/8 in into the hardest woods. T adjustment allows the user to increase power by 30%. All this, plus Senco's exclusive NeverLube®...

Sequential actuation. Adjustable depth-of-drive and exhaust. Belt hook, full soft grip with no-mar pad and rear bumper. Available in dual action or restrictive fire. Dimension of 12.16 in L x 10.88 in H, weighs 4.2 lb, Operating pressure is 70 to 120 psig (4.8...

The FN91T1 delivers the power and durability demanded by professional contractors for all-day performance on the toughest jobsites. It drives a wide range of paper tape collated nails from 0.113 to 0.135 in diameter and 2 to 3-1/2 in length. Upgraded features include, an...

Senco Nail, Collation Type: Wire Weld Coil, Collation Angle: 15 deg, Head Diameter: 0.113 in, Head Type: Full Round, Point Type: Diamond, Shank Type: Ring, 2-3/8 in L, Gray, Steel, Sencote, Suitable for: PAL100XP, SFN40, SFN2B Pneumatic Nailer

Senco Nail, Collation Type: Wire Weld Coil, Collation Angle: 15 deg, Head Diameter: 0.12 in, Head Type: Full Round, Point Type: Diamond, Shank Type: Ring, 3 in L, Steel, Sencote, Suitable for: PAL100XP, PAL130XP, SFN40, SFN2B Pneumatic Nailer

Senco Collated Nail, Collation Type: Plastic Strip, Collation Angle: 20 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Ring, 0.12 in Dia, 3 in L, Steel, Galvanized, Suitable for: Model SFN40, SFN2B Pneumatic Nailer

The JN91H1 is specifically designed for fastening pre-punched metal connection hardware to dense engineered lumber, like LVL. This small, compact metal connector nailer fits easily between rafters and joists, driving 1-1/2 in nails through joist hangers, seismic and hurricane ties and rafter straps. The...

The JN91P1 delivers the power to drive 1-1/2 to 2-1/2 in nails into the toughest substrates, including engineered lumber. This small and compact metal connector nailer fits easily between rafters and joists and the nosepiece design leads with a metal point for accurate nail...

Sencote coating, ProHead offset, diamond point.

The LS61H1P is an 18 ga finish stapler that drives 1/4 in crown staples from 3/8 to 1-1/2 in L. Convenience features like SENCO's oil-less design eliminates the need for routine lubrication. This stapler is ideal for woodworking, cabinetry and both internal and external...

For sheathing, subflooring, roof decking, subcomponents lathing, window units cedar shingles, furring Fascia & Soffits, vinyl siding. Fits Senco SNS45XP, SNS40, SNS44XP, SNS41, SNS50, M2+, M2, M1, DeWALT® D51430, Max TA551, Hitachi N500AC, 5008AA/AB, Porter Cable MS200, Others Atro Panta 100, DuoFast DS-7664, Fasco...

For Insulation, vapor barriers and felt roofing. Drives 20 ga staples with 7/16 crown and 3/8 length.