The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive® SDS heavy-duty connector screws which install easily, reduce fastener slip and provide a greater net section than bolts.

The HGA is designed to secure the truss to the top-plate in gable end truss connections and other framing applications. The engineered gusset in the angle increases strength for lateral and uplift loads. This hurricane gusset angle installs easily with Strong-Drive® SDS heavy-duty connector...

The HGUS is an extra-heavy-capacity hanger for applications requiring girder support. This girder hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. Value-engineered, the HGUS is designed to carry high-loads for an economical price.

All hangers in this series have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation and the use of standard nails for all connections.

Simpson Strong-Tie Flooring Cleat, Tapered Blunt Point, 16 ga, 2 in Length, Stainless Steel

Outdoor Accents® adjustable post-bases secure the post or column to concrete and are ideal for outdoor projects, such as pergolas, patio covers and other top-supported structures. These post-bases are part of our Outdoor Accents® Avant Collection™ and feature a clean, timeless design that complements...

The patented Outdoor Accents® hex head washer and structural wood screw combination provides the decorative appearance of a bolted connection. Its design provides an easier and significantly faster installation time compared to through-bolting. The hex head washer is code listed (IAPMO UES ER-192) and...

The PT-22A is a powder-actuated tool that uses 0.22 caliber a crimp loads, has single-shot firing action and is engineered for continuous use, high-reliability and low maintenance.

The PT-22HA is a small, powder-actuated direct fastening tool. The design includes a large strike point and comfortable grip, making it ideal for a range of DIY projects. This easy-to-use tool is hammer-activated and engineered for low maintenance.

The PT-27 is a semi-automatic and fast-cycling fastening tool that is engineered for continuous use, high-reliability and low maintenance. This versatile tool fires a variety of fastener types and lengths.

The Simpson Strong-Tie® Quik Stik installation tool provides contractors with a versatile solution that makes fastening rafter and truss connections fast, safe and easy.

Deep countersunk heads and slender shanks for finish work and trim applications. Easily driven flush with or below the work surface. Ideal for fastening corner boards, fascia and mitered ends on wood siding jobs. Beaver bite type 17 auger point for extra fast starts.

Deep countersunk heads and slender shanks for finish work and trim applications. Easily driven flush with or below the work surface. Ideal for fastening corner boards, fascia and mitered ends on wood siding jobs. Beaver bite type 17 auger point for extra fast starts.

Annular ring threads provide secure attachment of cedar, redwood and other stable decking materials to deck joists and preclude nail head popping. Slender shanks permit nailing at board ends without splitting. Small unobtrusive checker pattern heads blend with wood grain and diffract sunlight. Note,...

Highest quality nails for cedar, redwood and cypress siding materials. High tensile nickel/chromium stainless steel will last the life of wood siding without degradation ever. Slender gauge and blunt diamond point minimize splitting. Generous under-head fillet allows nails to be driven flush or countersunk...

Checkered pattern head and angular ring threads.

Simpson Strong-Tie Finishing Nail, Size: 8d, Tape Collation, 33 deg Collation, D-Style Head, Chisel Point, 15 ga, 0.072 in Diameter, 2-1/2 in Length, Stainless Steel, Suitable for: Bosch® FNA250-15, DeWalt® DC628K, D51276K, Grip-Rite® GRTAN250 Pneumatic Tool

Simpson Strong-Tie Finishing Nail, Collation Type: Adhesive, Straight, Head Type: Smooth, T-Style, Point Type: Chisel, Material Gauge: 16 ga, 0.065 in Dia, 2 in L, Stainless Steel, Suitable for: Bosch FNS250-16, Bostitch FN1664K, SB-1664FN, GFN1664K, DeWalt DC616K, D51257K, Duo-Fast FloorMaster 200-C, SureShot 764, Grip-Rite...

Simpson Strong-Tie Finishing Nail, Collation Type: Adhesive, Straight, Head Type: Smooth, T-Style, Point Type: Chisel, Material Gauge: 16 ga, 0.065 in Dia, 2-1/2 in L, Stainless Steel, Suitable for: Bosch FNS250-16, Bostitch FN1664K, SB-1664FN, GFN1664K, DeWalt DC616K, D51257K, Duo-Fast FloorMaster 200-C, SureShot 764, Grip-Rite...

Highest quality nails for cedar, redwood and cypress siding materials. High tensile nickel/chromium stainless steel will last the life of wood siding without degradation ever. Slender gauge and blunt diamond point minimize splitting. Generous under-head fillet allows nails to be driven flush or countersunk...