-
Irwin 91831 Nutsetter, 5/16 in Drive, 1-7/8 in L, 1/4 in L Shank, Hex Shank
Made of shock-resistant and heat treated S2 steel for maximum strength and hardness, magnets are four times more powerful than common magnets. Positive retention of the screw improves installation rate. Universal 1/4 in hex shank fits most power tools and quick-change chuck Adapters. For...- $117.93
- $117.93
- Unit price
- per
-
Irwin POWER-GRIP 26313 Tap and Die Set, 24-Piece, HCS, Includes: 10 mm- 1.5, 12 mm- 1.5, 12 mm- 1.75 Metric Plug Tap
We're working with a variety of tradesmen to solve endless fastening challenges. Irwin® HANSON® taps and dies are the answer. Whether creating new tools from raw steel or repairing damaged and worn threads, achieving a precise fit is essential. Irwin Industrial Tools® sets the...- $107.85
- $107.85
- Unit price
- per
-
Irwin 2024100 Pipe Clamp, Clamping Range: 3/4 in, Ergonomic Handle, Steel
Larger feet offer more stability and clearance between handle and worktop; larger, more ergonomic handle offers easier clamping with reduced hand fatigue, larger clutch plates allow for easier release and increased durability and dependability.- $45.49
- $45.49
- Unit price
- per
-
Irwin 322054 Hammer Drill Bit, 1 in Dia, 10 in OAL, Twist Flute, 1-Flute, 2 in Dia Shank, SDS Plus Shank
Bit tip and flutes remove dust more efficiently while the reduced area above the flute prevents binding while drilling. Chrome vanadium shaft and high heat resistance for reduced tip loss, fits all SDS-plus and Hilti TE-C rotary hammers.- $57.59
- $57.59
- Unit price
- per
-
Irwin IWHT84002 7-in-1 Wire Stripper, 8-1/2 in OAL, 10 to 20 AWG Solid, 12 to 22 AWG Stranded Cutting Capacity
Irwin 7-in-1 Wire Stripper, Cutting Capacity: 10 to 20 AWG Solid, 12 to 22 AWG Stranded, Spring-Loaded Jaw, Steel Jaw, Steel Handle, 4 in Handle Length, 8-1/2 in Overall Length- $39.55
- $39.55
- Unit price
- per
-
Irwin Unibit 15104 Step Drill Bit, 3/16 to 7/8 in Dia, 3 in OAL, Tree Flute, 1-Flute, 3/8 in Dia Shank, Round Shank
Self-starting bit features single flute cutting edge for greater control through steps. Three flatted shanks prevent slipping in drill chuck. SpeedPoint tip penetrates faster and prevents walking in applications such as drilling holes into stainless steel, copper, brass, aluminum, plastic, laminates and other thin...- $82.75
- $82.75
- Unit price
- per
-
Irwin 4935572 Auger Drill Bit, 1-1/16 in Dia, 17 in OAL, Hollow Center Flute, 7/16 in Dia Shank, Hex Shank
The Irwin with WeldTec™ ship auger is made stronger and lasts longer than any ship auger in the world. It features a welded cutting edge that easily cuts through tough materials like nail-embedded wood. It has twice the nail cutting life of standard ship...- $61.05
- $61.05
- Unit price
- per
-
Irwin Unibit 15101ZR Step Drill Bit, 1/8 to 1/2 in Dia, 3-1/4 in OAL, 1-Flute, 1/4 in Dia Shank, Hex Shank
Self-starting bit features single flute cutting edge for greater control through steps. Three flatted shanks prevent slipping in drill chuck. SpeedPoint tip penetrates faster and prevents walking in applications such as drilling holes into stainless steel, copper, brass, aluminum, plastic, laminates and other thin...- $39.29
- $39.29
- Unit price
- per
-
Irwin Marathon 14053 Table Saw Blade, 8-1/4 in Dia, 5/8 in Arbor, 40-Teeth, Carbide Cutting Edge
Thin kerf, 0.071 in, saw blade for circular saws. Innovative heat vents and expansion slots for straighter cuts. Reinforced shoulder for durability. Designed for framing and ripping. Alternate top bevel, 20 deg hook angle.- $53.45
- $53.45
- Unit price
- per
-
Irwin 94436 Nutsetter, 5/16 in Drive, 6-Point Drive, 6 in L, 1/4 in L Shank, Hex Shank
Irwin® Nutsetters stand apart from the competition by combining unsurpassed magnetic power and high-performance materials to give you total control of the fastener.- $116.09
- $116.09
- Unit price
- per
-
Irwin QUICK-GRIP 1964741 Bar Clamp/Spreader, 300 lb, 36 in Max Opening Size, 3-3/16 in D Throat, Steel Body
Irwin QUICK-GRIP Bar Clamp/Spreader, 300 lb Weight, Maximum Opening Size: 36 in, Throat Depth: 3-3/16 in, Body Material: Steel, Lock Type: Quick-Release Trigger- $48.85
- $48.85
- Unit price
- per
-
Irwin Marathon 14076 Table Saw Blade, 10 in Dia, 5/8 in Arbor, 80-Teeth, Carbide Cutting Edge
Thin kerf saw blades for miter saws and table saws. Alternate top bevel, 1.6 mm plate, 0.095 in kerf.- $94.85
- $94.85
- Unit price
- per
-
Irwin 323010 Hammer Drill Bit, 3/4 in Dia, 21 in OAL, Twist Flute, 4-Flute, 5 in Dia Shank, SDS Max Shank
Flute geometry removes dust from the hole quickly, double tempered, shot peened, finish with copper braze material for heat resistance and reduced tip loss. The chrome vanadium shaft is through hardened to 50-53 HrC. Fits all SDS-Max, Hilti TE F, G and Y rotary...- $67.89
- $67.89
- Unit price
- per
-
Irwin Marathon 14084 Table Saw Blade, 12 in Dia, 1 in Arbor, 100-Teeth, Carbide Cutting Edge
Thin kerf saw blades for miter saws and table saws. Alternate top bevel, 1.8 mm plate, 0.095 in kerf, 15 deg hook angle.- $112.05
- $112.05
- Unit price
- per
-
Irwin Unibit 10502ZR Step Drill Set, 3-Piece, HSS
Irwin Unibit Step Drill Set, HSS, Number of Pieces: 3, Includes: #1, #2, #3 Unibits- $92.85
- $92.85
- Unit price
- per
-
Irwin 3046007 Drill Bit, 1-3/8 in Dia, 5 in OAL, 3-Flute, 7/16 in Dia Shank, Hex Shank
Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately, 7/16 in quick-change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Each bit is packaged with one...- $47.39
- $47.39
- Unit price
- per
-
Irwin 3046006 Drill Bit, 1-1/4 in Dia, 5 in OAL, 3-Flute, 7/16 in Dia Shank, Hex Shank
Feed screws has a coarse thread for fast boring. Spurs on the outside diameter cut holes clearly and accurately, 7/16 in quick-change impact shank for use in applications such as large diameter holes in wood for pipe, conduit. Each bit is packaged with one...- $47.39
- $47.39
- Unit price
- per
-
Irwin 316015 Drill Bit Set, General-Purpose, Cobalt HSS, Black Oxide
Constructed of M-42 8% cobalt high-speed steel for super abrasive resistance in tough metals. Bits have a 135 deg split point which reduces feed pressure for easier penetration. Includes (2) 1/16 in, (2) 5/64 in, 3/32 in, (2) 7/64 in, 1/8 in, (2) 9/64...- $50.25
- $50.25
- Unit price
- per
-
Irwin IRHT83100 Manual Material Handling Jack, 330 lb, Steel Body
Irwin Manual Material Handling Jack, 330 lb Weight, Steel Body, Blue Body, Comfort Grip, Ergonomic Handle- $118.49
- $118.49
- Unit price
- per
-
Irwin HANSON 1765541 Tap and Hex Die Set, 12-Piece, Carbon Steel
Irwin HANSON Tap and Hex Die Set, Metric, Carbon Steel, Number of Pieces: 12, Includes: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1 and M7 x 1 Sizes- $35.05
- $35.05
- Unit price
- per
