-
Malco 12F 12" Folding Tool
The 12F model is 12″ (31 cm) long with 3/8″ (9.5 mm) & 1″ (25.4 mm) depths. This tool is ideal for HVAC applications such as folds for drive cleats and big deep folds for joist panning, plenums, register boots, trunk line end caps,...- $19.99
- $19.99
- Unit price
- per
-
Malco 18F 18" Folding Tool
The 18F Folding tool seams are formed from two steel halves that are permanently joined together. Handy slight holes assure proper depth alignment. This tool can be used to make hems, pans and drive edges.- $29.99
- $29.99
- Unit price
- per
-
Malco 24F 24" Folding Tool
This 24" (610mm) folding tool seams are formed from two steel halves permanently joined together. The handy sight holes assure proper depth alignment with 3/8" (9.5 mm) & 1" (25.4 mm) depths gauges. This extra-long folding tool may also be used as a mini-brake...- $34.99
- $34.99
- Unit price
- per
-
Malco C4R 5-Blade Gutter Downspout Crimper
If you are looking for a tool that efficiently downsizes the corners of aluminum or steel downspout, then the Malco 5 Blade Gutter Downspout Crimper is the tool you are looking for. The 5 blade design produces 1-1/4 inch (31.75mm) long double crimps without...- $35.99
- $35.99
- Unit price
- per
-
Malco C5R 5-Blade Sheet Metal Crimper
Equip yourself with only the best during HVAC installation with the C5R Malco 5 Blade Sheet Metal Crimper. The C5R creates long, shallow double crimps that replicates factory indentations. These longer shallower crimps result in a tighter fitting, more self supporting, leak proof connection....- $39.99
- $39.99
- Unit price
- per
-
Malco C6R 5-Blade Offset Sheet Metal Crimper
Use the Malco C6R Crimper overhead or in tight working quarters to downsize stove pipe and round metal duct and create a male connection for joining sections. Offset handles keep hands off work obstacles such as floor joists and underlayment while promoting correct hand...- $39.99
- $39.99
- Unit price
- per
-
Malco CGPR Ceiling Grid Punch
Malco’s Ceiling Grid Punch makes clean 1/8 inch (3.2 mm) holes in up to three layers of 25 gauge (0.53 mm) ceiling grid. The tool’s slim, but strong, “C” shaped steel frame ensures lightweight, one hand operation and allows easy access into tight corners. ...- $79.99
- $79.99
- Unit price
- per
-
Malco GND 7 5/8" Gutter Nail Driver
Use the Malco GND Gutter Nail Driver with hidden hangers and 8D galvanized nails to hang aluminum or steel gutters. A non-slip ergonomic grip provides multiple positions for grasping tool and working from above or below roof overhang. Durable 2-piece steel construction plus weather...- $24.99
- $24.99
- Unit price
- per
-
Malco HP18KR Hole Punch - Sheet Metal, Vinyl, Plastic
The HP18KR Hole Punch does the work of more expensive, bulkier punches faster and easier! Use the Malco HP18KR for making holes along the edge of sheet metal and vinyl plastic including rivet or screw fastener holes in metal ductwork and vinyl window extrusions,...- $94.99
- $94.99
- Unit price
- per
-
Malco JCC50R 3-in-1 J-Channel Cutters
Use Malco’s versatile J-Channel Cutters to make drain tabs, downstream notch cutouts, and miter trim cuts in vinyl channel. Available in three sizes for 1/2 inch (12.7 mm) channel using model JCC50R, 5/8 inch (15.9 mm) channel using model JCCR, and 3/4 inch (19.1...- $48.99
- $48.99
- Unit price
- per
-
Malco JCC75R 3-in-1 J-Channel Cutters
Use Malco’s versatile J-Channel Cutters to make drain tabs, downstream notch cutouts, and miter trim cuts in vinyl channel. Available in three sizes for 1/2 inch (12.7 mm) channel using model JCC50R, 5/8 inch (15.9 mm) channel using model JCCR, and 3/4 inch (19.1...- $48.99
- $48.99
- Unit price
- per
-
Malco JCCR 3-in-1 J-Channel Cutters
Use Malco’s versatile J-Channel Cutters to make drain tabs, downstream notch cutouts, and miter trim cuts in vinyl channel. Available in three sizes for 1/2 inch (12.7 mm) channel using model JCC50R, 5/8 inch (15.9 mm) channel using model JCCR, and 3/4 inch (19.1...- $48.99
- $48.99
- Unit price
- per
-
Malco M2001 Aviation Snips: Max2000
Malco’s original Max2000 features Euro-styled ergonomic handles. Textured, solid-colored, molded thermoplastic grips and finger stops compliment a narrower handle opening to fit large or small hands. An ambidextrous, thumb-operated handle latch and replaceable compression spring complete this user-friendly design. The Malco Max2000 Classic features...- $34.99
- $34.99
- Unit price
- per
-
Malco M2002 Aviation Snips: Max2000
Malco’s original Max2000 features Euro-styled ergonomic handles. Textured, solid-colored, molded thermoplastic grips and finger stops compliment a narrower handle opening to fit large or small hands. An ambidextrous, thumb-operated handle latch and replaceable compression spring complete this user-friendly design. The Malco Max2000 Classic features...- $34.99
- $34.99
- Unit price
- per
-
Malco M2003 Aviation Snips: Max2000
Malco’s original Max2000 features Euro-styled ergonomic handles. Textured, solid-colored, molded thermoplastic grips and finger stops compliment a narrower handle opening to fit large or small hands. An ambidextrous, thumb-operated handle latch and replaceable compression spring complete this user-friendly design. The Malco Max2000 Classic features...- $34.99
- $34.99
- Unit price
- per
-
Malco M2006 Aviation Snips: Offset - Max2000
Malco’s original Max2000 features Euro-styled ergonomic handles. Textured, solid-colored, molded thermoplastic grips and finger stops compliment a narrower handle opening to fit large or small hands. An ambidextrous, thumb-operated handle latch and replaceable compression spring complete this user-friendly design. The Malco Max2000 Classic features...- $44.99
- $44.99
- Unit price
- per
-
Malco M2007 Aviation Snips: Offset - Max2000
Malco’s original Max2000 features Euro-styled ergonomic handles. Textured, solid-colored, molded thermoplastic grips and finger stops compliment a narrower handle opening to fit large or small hands. An ambidextrous, thumb-operated handle latch and replaceable compression spring complete this user-friendly design. The Malco Max2000 Classic features...- $44.99
- $44.99
- Unit price
- per
-
Malco MC12A 12" Andy Classic Aluminum Handled Snips
Sleek styling, easy blade replacement, and original style handles make Malco’s 14″ Andy Classic snips the perfect addition to any tool bag. These snips are ideal for cutting vinyl siding, aluminum, copper, or sheet metal. The sleek head design improves maneuverability making it easier...- $39.99
- $39.99
- Unit price
- per
-
Malco MC12ARB Replacement Blades, Mc12A
Sleek styling, easy blade replacement, and original style handles make Malco’s 14″ Andy Classic snips the perfect addition to any tool bag. These snips are ideal for cutting vinyl siding, aluminum, copper, or sheet metal. The sleek head design improves maneuverability making it easier...- $21.99
- $21.99
- Unit price
- per
-
Malco MC12NG 12" Andy Aluminum Handled Snips (Gripped)
Malco’s 12″ Gripped Andy Snip’s features the same design and cutting power of other Andy Snip models but with added handle comfort. Grips add better comfort, fit, and control over other models. All Andy Snips are ideal for cutting vinyl siding, aluminum, copper, or...- $42.99
- $42.99
- Unit price
- per
