Forney Rotating Turbo Nozzle, 1/4 in Nozzle, 4.5 mm Orifice, 25 deg Angle, FNPT Connection, 3600 psi Pressure, Black

4.5 mm high-pressure rotating turbo nozzle with 1/4 in FNPT Inlet. Increases the cleaning efficiency by more than 200% over a 25 deg spray nozzle by using a 0 deg rotating tearing action. This nozzle is ideal for hard surface cleaning such as removing...

16 in outflow surface cleaner designed to clean multiple types of surfaces. Features dual rotating jets that spin rapidly, breaking up dirt without streaking. Features a pivoting head that cleans surfaces at multiple angles. 16 in clearing path width. Cleans large areas in a...

Three-piece pressure washer spray gun, wand and four-pack quick connect spray nozzle with holder kit. The spray gun has 3/8 in (9.53 mm) Female National Pipe Thread (FNPT) input and M22 female screw connect output. Use Forney 75183 or other similar hose with 3/8...

Forney Pressure Washer Hose, 3/8 in Nominal, 50 ft Length, MNPT Connection, 4000 psi Pressure, 250 deg F, Rubber

This high-pressure hose is reinforced with a high-tensile strength steel wire braiding for added durability. Features an abrasion-resistant, non-marking outer cover. Inner tube is composed of chemical-resistant synthetic rubber.

Forney High-Pressure Hose, 1/4 in Nominal, 50 ft Length, 3000 psi Pressure, 140 deg F, Rubber

Forney Detergent Injector with Hose, 3/4 in Inlet, 3/4 in Outlet, 140 psi Pressure, 1.5 to 4 gpm Flow Rate, 160 deg F, 48 in Hose

Designed for light and medium MIG and TIG applications to provide accurate flow of gas. Dual scale gauge with impact-resistant polycarbonate lens and machined brass body for maximum durability. Includes Adapter for 5/32 in (4 mm) gas hose.

Suitable for use with oxygen-acetylene only. Red hose for acetylene. Green hose for oxygen. use with acetylene fuel gas only. Resists kinks, heat, weather and solvents. Bleed hoses when not in use for at least 30 mins. Couple with one in ferrules only. Includes...

Suitable for use with oxygen-acetylene only. Red hose for acetylene. Green hose for oxygen. use with acetylene fuel gas only. Resists kinks, heat, weather and solvents. Bleed hoses when not in use for at least 30 mins. Couple with one in ferrules only. Includes...

Suitable for use with propane, propylene and MAPP gas. Features neoprene coating inside and out to resist corrosion from oil and petroleum-based fuel gases. Resists kinks, heat, weather and solvents. Bleed hoses when not in use for at least 30 mins. Couple with 1...

Versatile Victor compatible oxygen regulator for medium-duty applications. Forged brass bodies and bonnets for maximum strength. Sintered (heat-treated) metal inlet filter to trap impurities. Pressed, not soldered, joints for easy maintenance. Easy to read dual scale gauges with nearly unbreakable screw-on-lenses. Includes a safety...

Versatile Victor compatible oxygen regulator for medium-duty applications. Forged brass bodies and bonnets for maximum strength. Sintered (heat-treated) metal inlet filter to trap impurities. Pressed, not soldered, joints for easy maintenance. Easy to read dual scale gauges with nearly unbreakable screw-on-lenses. Includes a safety...

Forged brass bodies and bonnets for maximum strength. Sintered (heat-treated) metal inlet filter to trap impurities. Pressed, not soldered, joints for easy maintenance. Easy to read dual scale gauges with nearly unbreakable screw-on lenses. Victor compatible.

Forney Torch Handle, Compatible, Heavy Duty, Oxy-Acetylene, Tough Extruded Brass, Suitable for: Forney 01711 Torch Kit, Includes: Check Valves

Victor compatible oxygen-acetylene heating tip. #8 (8-MFA-1). Fits "Forney" 1680, 1702, 1705 (sku #: 890.9442), 1707 and 1753 (sku #: 891.2776) torch kits and "Victor" compatible light- and medium-duty equipment.

Medium-duty "Victor" is compatible with oxy-acetylene cutting attachment. Double O-ring seal for quick, leak-free, hand-tight connections. Head and body are made from forged brass for longer life. Fits "Forney" 01680, 01705 (Sku #890.9442) and 01707 torch kits.

The Forney Easy Weld 140 FC-i wire welder is a 120 V, 140 applications include do-it-yourself, maintenance and repair, metal fabrication and hobbyist.

The Forney Easy Weld Series of auto-darkening welding helmets are ideal for hobbyists and novice welders. These helmets are user friendly, comfortable, economical and cover a wide range of basic needs.