General-purpose rod with medium to shallow penetration. Medium to heavy slag is easily removed. Excellent for poorly fitted joints. Smaller sizes of rod are well-suited to low heat on thin metals. Use on all types of mild steel. Great for light gauge metal, sheet...

Produce quality results on smaller amperage AC/DC welders. Low hydrogen content reduces cracking and peeling of the weld material. Features excellent restart capability. Designed for welding low, medium and high-carbon steels as well as some higher strength low alloy steel. For frames, trailer hitches...

E312-16 stainless alloy easy all steel specialty welding electrodes are the ultimate rods for most grades of steel using any stick electrode power source. Can be used by anyone, regardless of prior welding experience. Features a superior combination of tensile strength and elongation. The...

2 ga highly flexible welding cable manufactured with 636 strands of fully annealed soft-drawn copper. Uses paper separator between copper and outer EPDM jacket. Will not kink, even in cold weather. Outer jacket has excellent oil, grease, water, flame, tear, cut and abrasion resistance....

Highly flexible cable manufactured with 1007 strands of fully annealed soft-drawn copper. Uses paper separator between copper and outer EPDM jacket. Will not kink, even in cold weather. Outer jacket has excellent oil, grease, water, flame, tear, cut and abrasion resistance. Rated at 600...

8 in (203.2 mm) long with 2 in (50.8 mm) jaw opening. Accepts up to #1/0 welding cable. Rugged, versatile, wide jaw ground clamp. Good for most grounding situations. Large contact surface area provides good cable connections and positive grounding.

Quick connectors for #1 through #4 welding cable extensions. Heat and oil-resistant covers.

Includes six each of "Forney" 70824 (Sku #891.5100) and 70825 (Sku #891.5118), 8 each of 70820 (Sku #891.5084) and 70822 (Sku #891.5092), 10 each of 70818 (Sku #891.5068) and 70819 (Sku #891.5076) plus free 6-chamber display.

3/8 in x 100 ft pressure washer hose with 3/8 in MNPT solid end and 3/8 in MNPT swivel end. The hose includes bend restrictors for added protection and kink resistance. The hose is reinforced with a high-tensile strength steel wire braiding for added...

Forney Rotating Turbo Nozzle, 1/4 in Nozzle, 4.5 mm Orifice, 25 deg Angle, FNPT Connection, 3600 psi Pressure, Black

4.5 mm high-pressure rotating turbo nozzle with 1/4 in FNPT Inlet. Increases the cleaning efficiency by more than 200% over a 25 deg spray nozzle by using a 0 deg rotating tearing action. This nozzle is ideal for hard surface cleaning such as removing...

16 in outflow surface cleaner designed to clean multiple types of surfaces. Features dual rotating jets that spin rapidly, breaking up dirt without streaking. Features a pivoting head that cleans surfaces at multiple angles. 16 in clearing path width. Cleans large areas in a...

Three-piece pressure washer spray gun, wand and four-pack quick connect spray nozzle with holder kit. The spray gun has 3/8 in (9.53 mm) Female National Pipe Thread (FNPT) input and M22 female screw connect output. Use Forney 75183 or other similar hose with 3/8...

Forney Pressure Washer Hose, 3/8 in Nominal, 50 ft Length, MNPT Connection, 4000 psi Pressure, 250 deg F, Rubber

This high-pressure hose is reinforced with a high-tensile strength steel wire braiding for added durability. Features an abrasion-resistant, non-marking outer cover. Inner tube is composed of chemical-resistant synthetic rubber.

Forney High-Pressure Hose, 1/4 in Nominal, 50 ft Length, 3000 psi Pressure, 140 deg F, Rubber

Forney Detergent Injector with Hose, 3/4 in Inlet, 3/4 in Outlet, 140 psi Pressure, 1.5 to 4 gpm Flow Rate, 160 deg F, 48 in Hose

Designed for light and medium MIG and TIG applications to provide accurate flow of gas. Dual scale gauge with impact-resistant polycarbonate lens and machined brass body for maximum durability. Includes Adapter for 5/32 in (4 mm) gas hose.

Suitable for use with oxygen-acetylene only. Red hose for acetylene. Green hose for oxygen. use with acetylene fuel gas only. Resists kinks, heat, weather and solvents. Bleed hoses when not in use for at least 30 mins. Couple with one in ferrules only. Includes...

Suitable for use with oxygen-acetylene only. Red hose for acetylene. Green hose for oxygen. use with acetylene fuel gas only. Resists kinks, heat, weather and solvents. Bleed hoses when not in use for at least 30 mins. Couple with one in ferrules only. Includes...